3.2V 12V 4S 10A to 60A LiFepo4 battery 18650 charger bms PCB BMS Protection Board with Balance 12.8V Lipo Cell temperature senso
3.2V 12V 4S 10A to 60A LiFepo4 battery 18650 charger bms PCB BMS Protection Board with Balance 12.8V Lipo Cell temperature sensor bms
◆separate port for charge/discharge We can customize any PCB from 1S to 30S lithium batteries with different current.
◆According to the customer request we can develop PCM in different sizes and structures.
◆BMS manufactured by high quality Mos and IC imported . Keep your battery long cycle serivce life
time.
◆Use top quality (A-level) protective integrated circuit IC, from the solution of Seiko of Japan.
◆Strong load ability, constant discharge current 10A/25/35A/45A/60A , use high voltage resistance, low inner resistance power Mosfet. The heat sink will greatly help cooling.
◆IC itself has power balancing function. The circuit is simple and reliable.
◆Typical voltage detection for each cell. So each battery will be prevented over charged or over discharged. Over current and short circuit protection function is very reliable.Long time short circuit of the load won’t affect the PCB and the battery.Temperature protection during charging and discharging.
◆PCB use high anti-corrosion, high water resistance, high impedance ESD conformal Coating.
|
Products Name
|
3.2V 12V 4S 10A to 60A LiFepo4 battery 18650 charger bms PCB BMS Protection Board with Balance 12.8V Lipo Cell temperature sensor
bms |
|
Rated Voltage
|
Rated/Nominal 3.2V
|
|
With Balance
|
35MV Started when Voltage reach 3.6V
|
|
Short Circuit
|
Yes
|
|
Charging Voltage
|
Series *4.2V
|
|
Separate Port
|
Optional (8A discharging port)
|
|
Charge current
|
10A 10A 20A 30A 50A
|
|
Discharge current
|
10A 20A 30A 40A 60A
|
|
Peak Discharge
|
30A 50A 60A 100A 180A
|
|
Custom Service
|
Logo,current,package,series
|